UV Printing Jigs for the Mutoh XpertJet 461UF

UV Printing Jigs for the Mutoh XpertJet 461UF

The Mutoh XpertJet 461UF is a compact, high-quality UV flatbed printer built for professional direct-to-object decoration on a wide range of substrates. Jigmade engineers every XpertJet 461UF jig to the printer's exact bed dimensions for accurate, repeatable results.

Every Jigmade jig ships with a PDF alignment template. Open it in your RIP software, register the jig to your platen, load your substrates, and print — no manual measurement required.

Mutoh XpertJet 461UF print area: 18.1" × 12.2" (460 × 310 mm)

Complete Jig Collection for the Mutoh XpertJet 461UF

  • Business Card Jig (3.5" × 2") — $243.75  |  Multi-up layout for standard business cards on the 461UF bed. PDF template included.
  • Business Card Jig (3.38" × 2.12") — $268.75  |  Specialty plastic jig for oversized card format. Digital file included.
  • CR80 Card Jig — $243.75  |  Standard CR80 layout for loyalty cards, access badges, and event passes.
  • Golf Ball Jig — 70 Spaces — $243.75  |  Print 70 golf balls per pass on your XpertJet 461UF. PDF template included.
  • Baseball Jig — $243.75  |  Recessed channels for regulation baseballs on the 461UF platen.
  • Can Cooler Sleeve Jig — $268.75  |  Holds neoprene and foam can cooler sleeves for accurate UV printing.
  • Contour Pen Jig — $243.75  |  Shaped channels for tapered and contoured pen bodies on the XpertJet 461UF.

Why Jigmade Jigs for the Mutoh XpertJet 461UF?

Built to spec for the Mutoh XpertJet 461UF bed. Every jig is dimensioned to the Mutoh XpertJet 461UF print area. No guesswork on clearance, height, or edge limits.

PDF template in every box. Each jig ships with a matching PDF alignment template. Open it in your RIP software, load the jig, and start printing. No manual measurement required.

Non-warp specialty plastic construction. Our jigs are precision-cut from durable, non-warp specialty formulated plastics that hold tight tolerances under UV lamp heat — pass after pass, without shifting or warping over time.

Same-day custom jig design. Need a jig for a product not listed here? Contact us and we'll quote a custom jig built to your exact substrate and the Mutoh XpertJet 461UF bed.

How to Use a Jigmade Jig with Your Mutoh XpertJet 461UF

  1. Set your platen origin. Use the Bed Base & Corner Alignment Jig (where available) to establish a repeatable registration point on your Mutoh XpertJet 461UF platen.
  2. Place the product jig. Register the jig to the corner alignment point. It sits flush on the platen without modification.
  3. Load the PDF template. Open the included PDF in your RIP software. The template is pre-sized to the jig's layout.
  4. Load your substrates. Place golf balls, cards, pens, or other items into the jig recesses.
  5. Print. Every item prints at the same position, every pass.

Frequently Asked Questions — Mutoh XpertJet 461UF Jigs

Do I need a jig to print on the Mutoh XpertJet 461UF?

For flat substrates like business cards or CR80 cards, your Mutoh XpertJet 461UF can print directly if the substrate is the right height. But for curved or irregular items — golf balls, baseballs, pens, can coolers — a jig is essential to hold the substrate at the correct print height and keep it from rolling or shifting during the pass. Without a jig, ink placement is inconsistent and waste is high.

Will these jigs fit my Mutoh XpertJet 461UF without modification?

Yes. Every Jigmade jig for the Mutoh XpertJet 461UF is dimensioned to sit directly on the standard platen without drilling, adhesive, or hardware changes. The Bed Base & Corner Alignment Jig (where available) clips to the existing platen edge to give you a fast registration reference.

How many golf balls can I print per pass on the Mutoh XpertJet 461UF?

Our Mutoh XpertJet 461UF golf ball jig holds 70 golf balls per pass. The jig keeps each ball stable at the correct height and uses a PDF alignment template for precise artwork placement.

What file format is the PDF template?

Templates ship as PDF files sized to your specific jig layout. They are compatible with most RIP software including Mimaki RasterLink, Roland VersaWorks, Epson Edge Print, and Adobe Illustrator. If you need a different format (AI, EPS, DXF), contact us and we'll send it.

How do I find the PDF template that came with my order?

The download link is in your order confirmation email. If you can't find it, email sales@jigmade.com with your order number and we'll resend it immediately.

Can you make a custom jig for a substrate not listed here?

Yes. Custom jig design is one of our core services. Submit a custom jig request with your substrate dimensions and we'll design a Mutoh XpertJet 461UF-compatible jig for your exact use case.

Do you ship internationally?

Yes — Jigmade ships to the US, Canada, and worldwide. Shipping costs and delivery times are calculated at checkout.

What is your return policy?

See our full Refund Policy. Custom jigs are non-refundable once production begins.

Need a Custom Jig for Your Mutoh XpertJet 461UF?

If you print a product that isn't covered above — oversized items, unusual shapes, multi-level substrates — our team will design a custom jig built specifically for your substrate and your Mutoh XpertJet 461UF. Submit a custom jig request →