UV Printing Jigs for the Roland LEF-12 / LEF-12i

The Roland LEF-12 and LEF-12i are compact entry-level flatbed UV printers trusted by sign shops, promotional product decorators, and small-format print businesses worldwide. Getting repeatable, production-quality prints on curved or irregular substrates requires the right jig — and Jigmade manufactures a complete range built specifically to the LEF-12 bed.

Every Jigmade jig ships with a PDF alignment template. Open it in your RIP software, register the jig to your platen, load your substrates, and print — no manual measurement required.

Roland LEF-12/12i print area: 12" × 7.9" (305 × 200 mm)

Complete Jig Collection for the Roland LEF-12/12i

Bed Base & Corner Alignment Jig — $62.50 | Establishes a repeatable registration origin on your LEF-12 platen for consistent jig placement across every run.
Business Card Jig (3.5" × 2") — $87.49 | Multi-up business card layout. PDF template included for immediate use in Roland VersaWorks.
Business Card Jig (3.38" × 2.12") — $93.75 | Precision-cut specialty plastic jig for the slightly oversized card format. Digital file included.
CR80 Card Jig — $87.49 | Holds standard CR80 credit-card-size substrates (3.375" × 2.125") in perfect alignment. Ideal for loyalty cards and access badges.
Golf Ball Jig — 30 Spaces — $87.49 | Print 30 golf balls in a single pass on your LEF-12. PDF template for artwork placement included.
Baseball Jig — $87.49 | Recessed channels hold regulation baseballs stable and level through the full print cycle.
Can Cooler Sleeve Jig — $93.75 | Flat-bed compatible holder for neoprene and foam can cooler sleeves. PDF template for artwork alignment.
Contour Pen Jig — $87.49 | Shaped channels hold tapered and contoured pen bodies level for accurate UV ink placement.

Why Jigmade Jigs for the Roland LEF-12/12i?

Built to spec for the Roland LEF-12/12i bed. Every jig is dimensioned to the Roland LEF-12/12i print area. No guesswork on clearance, height, or edge limits.

PDF template in every box. Each jig ships with a matching PDF alignment template. Open it in your RIP software, load the jig, and start printing. No manual measurement required.

Non-warp specialty plastic construction. Our jigs are precision-cut from durable, non-warp specialty formulated plastics that hold tight tolerances under UV lamp heat — pass after pass, without shifting or warping over time.

Same-day custom jig design. Need a jig for a product not listed here? Contact us and we'll quote a custom jig built to your exact substrate and the Roland LEF-12/12i bed.

How to Use a Jigmade Jig with Your Roland LEF-12/12i

Set your platen origin. Use the Bed Base & Corner Alignment Jig (where available) to establish a repeatable registration point on your Roland LEF-12/12i platen.
Place the product jig. Register the jig to the corner alignment point. It sits flush on the platen without modification.
Load the PDF template. Open the included PDF in your RIP software. The template is pre-sized to the jig's layout.
Load your substrates. Place golf balls, cards, pens, or other items into the jig recesses.
Print. Every item prints at the same position, every pass.

Frequently Asked Questions — Roland LEF-12/12i Jigs

Do I need a jig to print on the Roland LEF-12/12i?

For flat substrates like business cards or CR80 cards, your Roland LEF-12/12i can print directly if the substrate is the right height. But for curved or irregular items — golf balls, baseballs, pens, can coolers — a jig is essential to hold the substrate at the correct print height and keep it from rolling or shifting during the pass. Without a jig, ink placement is inconsistent and waste is high.

Will these jigs fit my Roland LEF-12/12i without modification?

Yes. Every Jigmade jig for the Roland LEF-12/12i is dimensioned to sit directly on the standard platen without drilling, adhesive, or hardware changes. The Bed Base & Corner Alignment Jig (where available) clips to the existing platen edge to give you a fast registration reference.

How many golf balls can I print per pass on the Roland LEF-12/12i?

Our Roland LEF-12/12i golf ball jig holds 30 golf balls per pass. The jig keeps each ball stable at the correct height and uses a PDF alignment template for precise artwork placement.

What file format is the PDF template?

Templates ship as PDF files sized to your specific jig layout. They are compatible with most RIP software including Mimaki RasterLink, Roland VersaWorks, Epson Edge Print, and Adobe Illustrator. If you need a different format (AI, EPS, DXF), contact us and we'll send it.

How do I find the PDF template that came with my order?

The download link is in your order confirmation email. If you can't find it, email sales@jigmade.com with your order number and we'll resend it immediately.

Can you make a custom jig for a substrate not listed here?

Yes. Custom jig design is one of our core services. Submit a custom jig request with your substrate dimensions and we'll design a Roland LEF-12/12i-compatible jig for your exact use case.

Do you ship internationally?

Yes — Jigmade ships to the US, Canada, and worldwide. Shipping costs and delivery times are calculated at checkout.

What is your return policy?

See our full Refund Policy. Custom jigs are non-refundable once production begins.

Need a Custom Jig for Your Roland LEF-12/12i?

If you print a product that isn't covered above — oversized items, unusual shapes, multi-level substrates — our team will design a custom jig built specifically for your substrate and your Roland LEF-12/12i. Submit a custom jig request →