UV Printing Jigs for the Roland VersaOBJECT MO-180

UV Printing Jigs for the Roland VersaOBJECT MO-180

The Roland VersaOBJECT MO-180 is a mid-range industrial UV flatbed printer designed for high-quality direct-to-object printing on a wide range of substrates. Jigmade builds precision jigs to the exact MO-180 bed dimensions so every print registers perfectly — pass after pass.

Every Jigmade jig ships with a PDF alignment template. Open it in your RIP software, register the jig to your platen, load your substrates, and print — no manual measurement required.

Roland VersaOBJECT MO-180 print area: 18" × 12" (457 × 305 mm)

Complete Jig Collection for the Roland VersaOBJECT MO-180

  • Business Card Jig (3.5" × 2") — $248.75  |  Multi-up layout sized for the MO-180 bed. PDF template included.
  • Business Card Jig (3.38" × 2.12") — $218.75  |  Precision specialty plastic jig. Digital file included.
  • CR80 Card Jig — $248.75  |  Standard CR80 card size. PDF template for loyalty cards and access badges.
  • Baseball Jig — $248.75  |  Precision recesses for regulation baseballs. Stable through the full UV print cycle.
  • Baseball Jig — Top Plate Only — $112.44  |  Replacement or add-on top plate for the MO-180 baseball jig system.
  • Can Cooler Sleeve Jig — $218.75  |  Flat-bed compatible holder for neoprene and foam can cooler sleeves. PDF template included.
  • Contour Pen Jig — $248.75  |  Shaped channels for tapered and contoured pen bodies on the MO-180 platen.

Why Jigmade Jigs for the Roland VersaOBJECT MO-180?

Built to spec for the Roland VersaOBJECT MO-180 bed. Every jig is dimensioned to the Roland VersaOBJECT MO-180 print area. No guesswork on clearance, height, or edge limits.

PDF template in every box. Each jig ships with a matching PDF alignment template. Open it in your RIP software, load the jig, and start printing. No manual measurement required.

Non-warp specialty plastic construction. Our jigs are precision-cut from durable, non-warp specialty formulated plastics that hold tight tolerances under UV lamp heat — pass after pass, without shifting or warping over time.

Same-day custom jig design. Need a jig for a product not listed here? Contact us and we'll quote a custom jig built to your exact substrate and the Roland VersaOBJECT MO-180 bed.

How to Use a Jigmade Jig with Your Roland VersaOBJECT MO-180

  1. Set your platen origin. Use the Bed Base & Corner Alignment Jig (where available) to establish a repeatable registration point on your Roland VersaOBJECT MO-180 platen.
  2. Place the product jig. Register the jig to the corner alignment point. It sits flush on the platen without modification.
  3. Load the PDF template. Open the included PDF in your RIP software. The template is pre-sized to the jig's layout.
  4. Load your substrates. Place golf balls, cards, pens, or other items into the jig recesses.
  5. Print. Every item prints at the same position, every pass.

Frequently Asked Questions — Roland VersaOBJECT MO-180 Jigs

Do I need a jig to print on the Roland VersaOBJECT MO-180?

For flat substrates like business cards or CR80 cards, your Roland VersaOBJECT MO-180 can print directly if the substrate is the right height. But for curved or irregular items — golf balls, baseballs, pens, can coolers — a jig is essential to hold the substrate at the correct print height and keep it from rolling or shifting during the pass.

Will these jigs fit my Roland VersaOBJECT MO-180 without modification?

Yes. Every Jigmade jig for the Roland VersaOBJECT MO-180 is dimensioned to sit directly on the standard platen without drilling, adhesive, or hardware changes.

Can you make a custom jig for a substrate not listed here?

Yes. Submit a custom jig request with your substrate dimensions and we'll design a Roland VersaOBJECT MO-180-compatible jig for your exact use case.

Do you ship internationally?

Yes — Jigmade ships to the US, Canada, and worldwide. Shipping costs and delivery times are calculated at checkout.

What is your return policy?

See our full Refund Policy. Custom jigs are non-refundable once production begins.

Need a Custom Jig for Your Roland VersaOBJECT MO-180?

If you print a product that isn't covered above, our team will design a custom jig built specifically for your substrate and your Roland VersaOBJECT MO-180. Submit a custom jig request →